D-Sub stamped pins double ports
Technical specifications
Current rating : 3.0 A
Dielectric withstanding voltage : 1000 Volts AC during 1 mn
Nominal voltage : 125 V
Insulation resistance : > 5000 MΩ
Contact resistance : < 25 mΩ
Operating temperature : -55°C to +105°C
Contact : phosphor bronze or brass
Plating : gold over nickel
Shell : tin plated steel over nickel
Insulator : PBT, UL94V-0
Contact : stamped
Version : 50 cycles, class 3
(1) Mounting (at the end of the reference) :
4-40 UNC : M3 :
empty : without screw 01 : without screw
02 : with screws attached 03 : with screws attached
04 : with screws insert 05 : with screws insert
Screws length : 4.8 mm
Dielectric withstanding voltage : 1000 Volts AC during 1 mn
Nominal voltage : 125 V
Insulation resistance : > 5000 MΩ
Contact resistance : < 25 mΩ
Operating temperature : -55°C to +105°C
Contact : phosphor bronze or brass
Plating : gold over nickel
Shell : tin plated steel over nickel
Insulator : PBT, UL94V-0
Contact : stamped
Version : 50 cycles, class 3
(1) Mounting (at the end of the reference) :
4-40 UNC : M3 :
empty : without screw 01 : without screw
02 : with screws attached 03 : with screws attached
04 : with screws insert 05 : with screws insert
Screws length : 4.8 mm
(M ou F).jpg)
Create your part number
|
AD
Antelec
D-Sub |
XX
Number of
terminals of top connector |
M
Top
Connector M for Male or F for Female |
YY
Number of
terminals of bottom connector |
M
Bottom
Connector M for Male or F for Female |
15
Distance
between axes (X) 15.88 mm or 19 for 19.05 mm or 22 for 22.85 mm |
1H
1 pair of
board locks or 2H for 2 pairs of board locks |
7
Distance
betweens hooks (Y) 7 mm or 8 for 8 mm |
4-40 UNC
or M3 : see (1) above |
Product range
429